SP-type

SP-type Inter-Connector consists of alternate layers of conductive and insulating rubber and of soft rubber insulators fitted on both sides. Since SP type has lower resistance than SS/SG, it is particularly ideal for display with tall height, such as LCD with backlight.

Outline Dimensions:

Dimensions and Tolerances:

Item		Unit	0.05P type	0.10P type
Pitch	P	mm	0.05±0.03	0.10±0.04
Length	L	mm	2.0~20.0±0.15 20.1~90.0±0.65% 90.1~150.0±0.6 150.1~200.0±0.8 200.1~275.0±1.0
Height	H	mm	1.0~5.0±0.1 5.1~20.0+0.15/-0.1
Width	W	mm	1.2~2.3± 0.1 2.4~4.0±0.15
Width of conductive layer	Z	mm	0.3±0.05 0.6±0.05

*H≧W/2

Inquiry

Application

Basic Properties:

Item	Component	Unit	0.05P type	0.10P type
Specific gravity	Insulator Conductor Edge insulation part		1.15 1.15 1.05	1.15 1.15 1.05
Shore hardness A	Insulator Conductor Edge insulation part	ISO7619 (type A)	65~73 60~65 20~25	65~73 60~65 20~25
Compression set	*	%	15~20	12~18
Volume resistivity	Insulator Conductor Edge insulation part	Ω/cm	1 x 10¹⁴ 1.3 8 x 10¹³	1 x 10¹⁴ 1.3 8 x 10¹³
Dielectric breakdown voltage	Insulator Edge insulation part	kV/mm	23~27 23~27	23~27 23~27
Insulation resistance (500V DC)	*	MΩ	1 x 10³≦	1 x 10³≦
Operating temperature range		ºC	-25~85	-25~85

*The test is carried out with Shin-Etsu’s own method.

Compression Curves:

Note:
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn’t guarantee the usage of the connector.