SEC-type

Uses high grade carbon, that provides low resistance in conductivity when compared to other carbon connectors. The fine pitched connector & low resistance material is suitable for use in with color displays and board to board.

Compression Curves:

Outline Dimensions:

Inquiry

Application

Dimensions and Tolerances:

Item		Unit	SEC type
Pitch	P	mm	0.05±0.03
Length	L	mm	2.0~20.0±0.15	150.1~200.0±0.8
			20.1~90.0±0.65%	200.1~300.0±1.0
			90.1~150.0±0.6
Height	H	mm	1.5~5.0±0.1	5.1~20.0+0.15/-0.1
Width	W	mm	1.5±0.1	2.0±0.1
			2.5±0.15	3.0±0.15
			3.5±0.15	4.0±0.15
			4.5±0.15	5.0±0.15
Width of conductive layer	Z	mm	0.7±0.05

*H≧W/2

Basic Properties:

Item	Component	Unit	SEC type
Shore hardness A	Insulator Conductor Edge insulation part (1)	ISO7619 (type A)	65~73
			60~65
			20~25
			35~40
Compression set	*	%	15~20
Volume resistivity	Insulator Conductor Edge insulation part	Ω/cm	1 x 10¹⁴
			1.3
			1 x 10¹¹
Dielectric breakdown voltage	Insulator Edge insulation part	kV/mm	23~27
Dielectric breakdown voltage	Insulator Edge insulation part	kV/mm	23~27
Insulation resistance (DC 500V)	*	MΩ	1 x 10³≦
Operating temperature range		ºC	-25~85

(1) The hardness of the support material has alternatives of 20° and 35°. *The test is carried out with Shin-Etsu’s own method.

Note:
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn’t guarantee the usage of the connector.

SEC-type

Compression Curves:

Outline Dimensions:

Application

Dimensions and Tolerances:

Basic Properties:

SEC-type

SP-type

SG-type

SS-type

S-type

DM-type

MS-type

MAF-type

SEC-type

Compression Curves:

Outline Dimensions:

Application

Dimensions and Tolerances:

Basic Properties:

Inter-Connector Products