MT-type

MT type series are anisotropic conductive sheet type, which consists of soft silicone rubber and of gold-plated metal wires embedded densely into it. This type of Inter-Connector is suitable for inspecting and connecting IC packages such as BGA, QFN or SOIC. Since MT-4X type has 4-time metal density, it can be used to CSP. Especially, MT series are superior in transmitting high cycle.

Outline Dimensions:

Inquiry

Application

Dimension and Tolerance:

Pitch(mm)		Pi:0.10±0.03 x Ps:0.10±0.05
Pitch(mm)	4X	Pi:0.05±0.03 x Ps:0.05±0.03
Length	(mm)	Max:50.0±1.0 Min:5.0±0.5
Width	(mm)	Max:50.0±1.0 Min:5.0±0.5
Thickness	(mm)	0.5+0.05/-0	1.0+0.05/-0	2.0+0.05/-0
Offset	(mm)	0.25±0.1	0.5±0.1	1.0±0.1

*Please consult with us for larger size than 50L x 50W.
Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.

Durability

Offset to Connecting Electrode

Continuity Resistance:

Attentions:

A small amount of silicone will remain on the inspected (IC package, etc.,) connected with MT-type connector.
When the inspected (IC package, etc.,) with soldered electrodes is pressured and welded to MT-type connector, the solder can adhere to the metal wire part of the connector.
When the inspected (IC package, etc.,) is pressured and welded to MT-type connector, it can be absorbed to the connector.
Attachments such as dirt, dust and the other alien substances will remarkably increase the contact resistance of the connector.
MT series Operating Temperature Range: -55~125 degreeºC (1000hrs Performance Tested).

A cross section cut through L direction will be inclined.

A cross section cut through L direction will be inclined. See the top illustration.

Note:
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn’t guarantee the usage of the connector.