JS-type

JS-type Inter-connectors consist of conductive silver/carbon traces printed on polyester film. Adhesive material, in which conductive particle is dispersed, is applied to the traces to heat seal the connectors to other components. The adhesive type (KN) is a semi-thermosetting adhesive. The component contains no chlorine, and is compatible with ZIF connector, which is easily inserted and extracted with little force.

Outline Dimensions:

Inquiry

Application

Dimension and Tolerance

Item		Unit	Standard
Size L x H		mm	100 x 150
Dimension tolerance	Length (L)	mm	±0.25
Dimension tolerance	Height (H)	mm	H≦120±0.25 H＞120±0.5
Width of conductor (Tc)		mm	0.1
Pitch tolerance		mm	±0.05 (P＜1.0) ±0.03 (0.2≦P≦0.4) ±0.10 (P≧1.0)
Accumulative pitch (TP)		mm	±0.05 (P≦0.4, TP≦100) ±0.10 (P＞0.4, TP≦100)
Thickness of base film (T)		μm	25
Pitch (P)		mm	≧0.2
Thickness of cover film (option)		μm	12 or 25

Construction:

Item	JS-KN type
Base Film	Polyester
Conductive lines	Thermosetting resin silver/carbon ink
Adhesive	Gold plated carbon particles Half-thermosetting synthetic rubber adhesive
Insulation layer	Printed themoplastic synthetic rubber

Basic Properties:

Item	KN Data	Conditions
Condutive resistance	≦0.5Ω/	10~30ºC, 30~80%RH
Insulation resistance	≧100MΩ	10~30ºC, 30~80%RH
Peel strength (initial)	≧2.94N/cm	90°peel, 100 mm/min.
Storage time	6 months max.	Sealed, 0~40ºC, RH≦50%

* Tests carried out with Shin-Etsu standard methods.

Bonding Conditions Range

Item	JS-KN type
Adhesive temperature (1)	140~170ºC
Pressure	3.5±0.5MPa
Time (2)	7±2seconds (Adhesive temp.≧140ºC)

(1) This temperature should be applied only to the bonding area.
(2) Time (2) means keeping one at reaching the adhesive temperature (1).
*Surface should be free of dust and contamination.
*Above “BONDING CONDITION” is not specification. It is only condition which are got in our test. Your proper condition depends on heatsealing machine, material of jig, thichness and material of cushion, size and material of adherent, environment in your process and so on. Evaluation in your process should be necessary by yourself.
*The test is carried out with Shin-Etsu’s own method.
*The above conditions are provided only for reference and are based upon our company’s in-house tests. Applicable conditions will vary depending on the thermal capacity of equipment, cushioning material, thickness, adhesive body size, material, exoergic properties of the lower supporting jig, and a variety of other environmental factors. As such, the above conditions should be used only for reference and implemented only after thorough testing.

Note:
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn’t guarantee the usage of the connector.